Resin Coasters for Beginners – Resin Coasters DIY Projects

No Comments

Resin coasters for beginners can be a great project to start with. If you have not heard of, I’m Bloggers Club, are an online group of bloggers from all over the world who come together every month on the second Monday of each month to share a new themed DIY resin project for their readers. This could be anything ranging from how-to articles on a particular kitchen appliance to articles on crafts and even crafts and recipes. The point is to get everyone excited about the possibility of making their very own coasters and sharing their thoughts with other members of the online community. When you are doing a DIY project as a beginner, the first thing you are going to want to do is find a good resin craft plan or guide that you can use as a guide when you are creating your project. There are many resources online that can help you find just this, but I will highlight some resin coasters for beginners ideas in this article.

You may have noticed that some drink coasters have a built in coaster. This is something you are going to want to keep an eye out for because it can be a very inexpensive way to get started. You can find these at just about any store that sells coasters, including big box retailers like WalMart and Target. You can also try looking for “do it yourself” ideas online; you may find a lot of great ideas just by browsing through the next Google search!

Another idea that you may find if you search online is to make your own interior frugalista air bubbles. There are several ways that you can make air bubbles using simple craft foam and decorative items that you already have on hand. You can either purchase the craft foam, or you can also find interior foam cutters at the craft store that are sold in bulk. The nice thing about resin coasters is that they have tiny little air bubbles that make them feel more like real coasters than regular foam. To make these air bubbles you will want to fill some vials with water, and then place a vial on the bottom of one of your empty soda bottles.

You are now ready to make your first batch of coasters. All you have to do is cut out the vial and chipboard shapes and stick them onto the top of the soda bottle. Once you have done this, you will want to apply some silicone molds to the inside of the vial. Silicone molds are great for things like coasters because they are very resistant to wear and tear. After you have applied the silicone molds to the vial, you will then want to put the bottom of the vial onto the chipboard foam that you have just created.

When it comes time to heat up the air bubbles in the vial, you will want to make sure that the coasters are lined up with the vial being the hot side and the bottom being the cold side. Most of the time this will be on the back of the chipboard shapes. This is how you will know when the mold has set correctly. Once you have lined up the coasters, you will then take your heat gun and shoot the coasters up into the air. This will cause the foam to rise, and once the foam has risen it will start to contract.

After you have fired up the heat gun, you will then want to turn off the air bubbles with the blow gun. You will then want to pour the resin coasters out onto the table, and you will want to immediately cover the coasters with the plastic wrap that you have prepared earlier. After you have done all of this, you will want to lightly dust the surface of the coaster with the paper towel that you have previously prepared. This will help you ensure that there are no particles of dust within the coasters, which can potentially give your finished project a funny taste.

Categories: DIY

Leave a Reply

Your email address will not be published. Required fields are marked *